CISCO E1200 BEDIENUNGSANLEITUNG Pdf-Herunterladen (2025)

FAQs

What is the default username and password for a Linksys E1200? ›

The default username is “admin”. The default password is “admin”.

Plug in and power on the router. Flip the router over so you have access to the bottom. With a small and sharp object such as a paperclip or pin, press and hold the Reset button for 5 to 10 seconds. Flip the router back over to its normal position, then wait 30 seconds for it to fully reset.

The default router password for all Linksys Smart WiFi Routers is admin. However, it is recommended to personalize your password to ensure that the router is safe from unauthorized access.

The default password is admin/1234 and seems like you have tried it. This may be because you changed it before. Could you help to factory default the switch first?

What is the 192.168.1.1 admin username and password? admin/admin is the most common username/password but that depends on the type of router. Other popular username/password combinations are admin/Admin, admin/password, and admin/1234.

Hardware Reset

Press the Reset button located at the back of the device with a pin for approximately 15 seconds or until the power light on the front of the device starts flashing. The Router reloads and is set to the default configuration settings.

Press and hold the reset button for between 10 and 15 seconds. This will restore the router to its original factory settings and reset the password in the process. Log into your router using the default username and password. In most cases, the default password will be “admin,” “password,” or left blank.

How to find router admin password without resetting? ›

Check the sticker on your router.

Unless you've changed your home router's admin password, it's likely still set to the manufacturer's default. You'll also find the default Wi-Fi network name and password printed on the router. Both passwords may be listed on the same or separate stickers.

You can change these default passwords to something a bit more secure, but then it's on you to remember the credentials you've used. If you're working with a router for which you don't know the password, you'll need to reset the router to use its default settings, and then find out what those default credentials are.

The default username is often admin, and the password is typically either admin or password. Change the Default Password: Using your computer or mobile device, open a web browser like Google Chrome, Microsoft Edge, or Mozilla Firefox. In the address bar, type the Router IP address you noted earlier and press ENTER.

On the login page, key in the default user name (admin) and password (admin).

The Gateway's login page will be displayed. Step 6: Enter admin as the Username and the Login Password as printed on the sticker on the rear of the device.

The Linksys default password is admin. Hackers know these defaults and may try to use them to access your wireless device and change your network settings.